How to Use
Retain the outer packaging for future reference.
Regular usage:
1. Remove the protective roller cover before use and ensure that the roller head is securely inserted into the unit. Do not use without the roller head attached.
2. Turn on the unit by twisting the silver ring to the left and gently glide the roller head over hard skin and the dead skin will gradually exfoliate. Use only on dry skin. Do not press too hard or the unit will stop. Repeat until the level of smoothness is obtained. Warning: Do not use in the same area for more than 3-4 seconds at a time. Stop if skin becomes sore or inflamed.
3. Turn the unit off by twisting the silver ring to the right and wipe or rinse feet.
Using for the first time:
1. Unscrew the base of the unit in an anti-clockwise direction and remove.
2. Remove and dispose of both the red insulator tab and plastic ring.
3. Replace the base of the unit and screw in a clockwise direction until secure.
Changing the Batteries:
1. Unscrew the base of the unit in an anti-clockwise direction.
2. Remove the base from the unit and remove the used batteries.
3. Insert 4 new AA batteries in the directions indicated on the unit.
4. Replace the base of the unit and screw in a clockwise direction until secure.
5. Do not mix old and new batteries or alkaline and standard batteries. Do not use rechargeable batteries. Used batteries must be recycled or disposed of correctly.
Products showing the 'Crossed Through' wheelie bin symbol must be recycled separately from household waste at the end of their useful life. Please DO NOT dispose of appliance in normal household waste. Your local appliance retailer may operate a 'take-back' scheme when you are ready to purchase a replacement products, alternatively contact your local government authority for further help and advice on where to take your appliance for recycling.
Cleaning after Use:
The device is not waterproof. Detach and wash the roller head to clean the surface.
1. Turn the unit off
2. Remove the roller from the unit by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Rinse the roller head under the tap.
4. Clean the body of the unit with a clean damp cloth.
5. Dry both the roller head and main unit with a clean dry cloth.
6. Replace the roller and the protective cover.
Changing the roller head
For the perfect finishing touch use Velvet Smooth with Diamond Crystals Soft Touch Roller Head. For very hard, stubborn skin use Velvet Smooth with Diamond Crystals Extra Coarse Roller Head. Replace the roller head when you find it becomes less effective. Only recommended for use with Scholl Velvet Smooth Roller Heads.
1. Ensure the unit is turned off.
2. Remove the roller from the unit by pressing the eject button on the side of the unit and gently pulling the roller away.
3. Place the new roller into the unit by pressing the pins on either side of the roller head and inserting the head into the device.
4. Check that the roller head is securely attached to the device before use.